Sniper's Paradise!
Setting up a Server on a cable / DSL / T1 modem on a LAN using SYGATE.
SYGATE is a software program designed to let you connect all the computers on your LAN to the Internet thru a single IP address such as Cable, DSL, or a T1 connection. You can run as many computers as your LAN hub setup will allow. But your ISP (Internet Service Provider) will only see the one Computer attached that you are using for your server. You can click on your browser from any computer and it will pass thru the server right to the internet as if you had a direct connection .
SYGATE has to be installed on all the computers you want to have access the internet. Only the one box connected to the internet will be setup as a server, the others will be setup as clients. Here is a typical LAN setup:
You will need to download and install WINSOCK2 on youry PC's to get SYGATE to recognize the NIC's (Network Interface Cards). WINGATE only required WINSOCK2 on the client box, not the server box, however SYGATE requires it on all the PC boxes. Setting up the server and the client box, pretty similar to the WINGATE instructions and settings as far as the TCP/IP goes. You should be able to access the Internet from both the server and the client boxes once installed.
All logos and trademarks are properties of their respective owners.
Unreal™ is a registered trademark of Epic Games Inc.
Privacy Policy
Website by Softly
Powered by RUSH